Tender for Pearce’s Mill Window Works

Tender for Pearce’s Mill Window Works

Keynvor MorLift Ltd seeks to appoint a suitable contractor to provide works in support of a part ERDF funded project in Falmouth.

The Pearce's Mill Building is a three-storey roughcast rendered masonry structure with a hipped roof of profiled cement board. The majority of the ground floor area is raised approx. 900mm above finished wharf level, with a small loading bay area to the east elevation. The building has two existing staircases serving both upper floor levels. One exits to the north and one to the south-east corner. Both are within existing masonry cores. This building is currently used as a joinery workshop at ground floor level and small artist studios and offices at the upper levels - total floor area of approx. 995m2.

The building itself is located on a busy working wharf which will require careful consideration in the planning of the works.

KML wishes to appoint a contractor to carry out the windows work package on a supply & fit basis.

Please note the following requirements:

  • All window openings to be top hung type with unrestricted friction hinges
  • All Units to be Anthracite Grey UPVC
  • Dimensions within the drawings are the dimensions of the openings for reference only, supplier responsible for site survey and exact measurements onsite
  • Windows to be supply and fit and includes removal and disposal off site of existing window units.
  • Required minimum Ten-year guarantee and an independent Insurance Backed Warranty in line with FENSA (or similar)

The contract is expected to start in February 2023 and run until June 2023.

Site Visits are encouraged and are by appointment only - these may be requested no later than 6th January 2023. Please refer requests to Debbie Richards at debbie.richards@keynvormorlift.co.uk.

Tender documents can be obtained from Craig Pullen, Procurement Consultant by email request to craig@cpconsulting.org.uk.

Completed tenders must be returned to tenders@cpconsulting.org.uk no later than Noon on Friday 13th January 2023.